Carbide flat end mills with shank With standard size in stock, also produce as customer's needs.
Application:
Used for stainless steel, cast iron, aluminum, copper, graphite, plastic parts, composite materials, titanium alloy, nickel, heat-resistant steel, non-alloy steel,steel < HRC58 .
※Flute number can be customized as per customers' requirements.
※Each size of carbide flat end mills with shank can be customized sharp corner type.
Dimensions for Carbide flat end mills with shank (mm):
EJ Carbide flat end mills with shank use very fine ultrafine particles 0.3m/mCo12% tungsten carbide as raw material,With high heat resistance and high lubricity AITiN PVD coating,Especially for wet high-speed cutting, stainless steel, alloy steel, mold steel ~ HRC58 of steel.
With a unique geometric angle of the special cutting edge design, so the chip smooth, stressed that can be used for processing ditch and side with large depth cutting, large feed heavy cutting.
TiAlN, CrN, TiAlCrN are newly developed hard coating materials. Its chemical stability and good anti-oxidation wear performance, with its processing of high alloy steel, stainless steel,mold steel, titanium alloy and nickel alloy,the tool life 3-4 times higher than TiN coating.
In addition, if there is a suitable aluminum concentration in the TiAlN coating, a hard inert protective film is produced at the interface between the tool's rake face and the chip, and the film has better heat insulation and is more effective for high speed cutting.
