9/16（0.5625） Inch Square Carbide Endmill With standard size in stock, also produce as customer's needs.
Material: Solid Carbide(Tungsten steel) Cut typ： Finishing Coating : TiAIN/AITiN Measurement System: Inch Shank Type: Round Tolerance Held: H10 Product vedio show please click:https://youtu.be/xs2gAbghIjY Application:
Used for stainless steel, cast iron, aluminum, copper, graphite, plastic parts, composite materials, titanium alloy, nickel, heat-resistant steel, non-alloy steel.
Dimentions for 9/16 inch square carbide endmill (inch):
Specification
Length
Cutting length
Work length
Shank diameter
Flute
Cutting Direction
9/16 inch square carbide endmill
3-1/2
1-1/8
1-1/8
9/16
4
right hand
EJ Carbide 916 inch square carbide end mill use very fine ultrafine particles 0.3m/mCo12% tungsten carbide as raw material,With high heat resistance and high lubricity AITiN/TiAIN PVD coating,Especially for wet high-speed cutting, stainless steel, alloy steel, mold steel ~ HRC58 of steel.
Solid carbide tools offer long tool life and faster cutting speeds than other substrates, but are more brittle and must be used with rigid toolholding systems
Titanium aluminum nitride coatings become self-lubricating when used at very high speeds, making them ideal for cutting without coolant ("dry machining")
Round shanks allow use with a wide variety of toolholding systems
Center cutting geometry
Design for increased chip removal rate
TiAIN is a new coating material developed in recent years. The coating color is purple black, surface hardness 2800HV, the oxidation temperature is 800 ℃, and the adherence strength is very good. Its adhesion is larger than TiN coating, with excellent heat resistance,high oxidation temperature, so suitable for high-speed processing and high hardness steel processing. TIAIN coated carbide cutting tools,carbide end mills with excellent oxidation resistance,good high temperature hardness, the temperature coating material began to oxidize higher than TICN coating, this feature can make the coating carbide cutting tools,coating carbide end mills to avoid high temperature hazards, Thereby protecting the cutting edge. TIAIN coated carbide cutting tools,carbide endmill suitable for mold finishing machining, in the absence of cutting fluid, it can high-speed cutting hardened steel without impact of cutting heat. TiAIN coating has excellent chemical stability and anti-oxidation wear performance, use TiAIN coating carbide endmill processing high alloy steel, stainless steel, titanium and nickel alloy,the tool life 2-3 times higher than TICN coating carbide end mills.
