EJ Carbide Newly introduced aerial profile high light carbide end mill cutter

As we all know, the general milling cutter in the copper, aluminum material side milling easy to produce fine lines, yin and yang, vibration knife knife, roughness is not good, and fail to meet customer requirements of uselife. The aviation parts of the copper, aluminum materials, than ordinary copper, aluminum material strength and ductility better, in the milling process, more prone to the above problems. EJ Carbide tools to crack this problem, specifically developed a high light cutter, get very good results, processing parts side is very bright, get customer recognition. EJ Carbide high light milling cutter is characterized by processing copper and aluminum material finish high, smooth, no vibration. EJ Carbide specifically designed to make the surface without scratches, no knife marks, with good surface roughness, can reach Ra0.4 and below.

1 Product Name: Solid Carbide Highlight Endmill Cutter.

2 main purposes: for the workpiece slot chips, side chips, surface cutting and so on.

3 main features: EJ Carbide high light milling cutter imported from Germany, with high hardness, high wear resistance and high light. Has a good milling performance, greatly improving the work efficiency and surface roughness. Ultrafine particles Carbide has a high wear resistance and strength, can be 50 degrees below the heat treatment material directly to the rough processing, reduce the number of tool changes to improve machine tool processing efficiency. Edge with seismic design, the maximum inhibition of processing vibration, especially for processing copper alloy, aluminum and magnesium alloy and aluminum products require high-light materials. EJ three-edged high-light milling cutter unique groove design and grinding method, with easy to chip, non-sticky, high feed, long service life and high surface finish after processing advantages.

Application data:

Workpiece material: oxygen-free copper

Material hardness: 75-114HB

Machine tools: vertical machining center

Tool holder information: high-precision collet

Clipping beating: 0.003

Cooling: cold outside

Surface quality: Ra0.8

Tool diameter: D4

Line speed VC: 85m / min

Speed S: 6800 r / min

Feed F: 2000 mm / min

Milling depth Ap: 12mm

Milling width ae: 0.1mm