EJ Carbide newest carbide insert grade and groove
EJ601 is a material with both wear resistance and toughness. It is suitable for carbon steel, alloy steel and fine-semi-finishing. It is the first recommended grade for turning tools;
EJ602 has excellent toughness and thermal shock resistance, and has good wear resistance. It is suitable for steel parts and milling, especially suitable for applications with high toughness under unstable conditions.
EJ601C is a PVD coating with excellent anti-wear and anti-built-off properties on a toughened cermet substrate. It has better overall performance than uncoated cermet inserts and is suitable for high efficiency and high surface quality steel. Turning is also suitable for turning stainless steel.
EC205Y is a graded layer of cemented carbide matrix with high cubic content of coarse particles in low Co. It has good resistance to plastic deformation and excellent high temperature performance. It is matched with MT-TICN+ fine columnar α-Al2O3 and Al2O3 is textured coating. With extremely low frictional resistance, it is suitable for general grades of steel finishing to semi-finishing;
EC305Y is a medium-coarse medium-thick grain high-cubic phase gradient layer cemented carbide matrix with good resistance to plastic deformation and toughness. It is matched with MT-TICN+ fine columnar α-Al2O3 and Al2O3 is a textured coating. It has extremely low frictional resistance and is suitable for general grades from semi-finishing to roughing of steel.
The base of EG215Y is medium-thick grain WC and high-cubic phase grade layered cemented carbide. The coating is a thin CVD alumina coating with good resistance to plastic deformation. The surface is smoothed by special surface treatment. It has extremely low frictional resistance and is suitable for high-speed continuous turning of austenitic stainless steel with stable working conditions, suitable for processing large parts.
The -EM groove type has a large rake angle and a variable blade width design to ensure the sharpness of the cutting edge and also the strength of the cutting edge. It is equipped with a smooth chipbreaker for chip removal to further reduce the cutting resistance. The blade has strong versatility. With different materials, it can be used for semi-finishing and finishing of steel and stainless steel.